-->
This article shows you how to capture video from multiple sources simultaneously to a single file with multiple embedded video tracks. Starting with RS3, you can specify multiple VideoStreamDescriptor objects for a single MediaEncodingProfile. This enables you to encode multiple streams simultaneously to a single file. The video streams that are encoded in this operation must be included in a single MediaFrameSourceGroup which specifies a set of cameras on the current device that can be used at the same time.
For information on using MediaFrameSourceGroup with the MediaFrameReader class to enable real-time computer vision scenarios that use multiple cameras, see Process media frames with MediaFrameReader.
IP camera streaming into OpenCV. As getting vision from an IP camera into OpenCV is an unnecessarily tricky stumbling block, we'll only concentrate on the code that streams vision from an IP camera to OpenCV which then simply displays that stream.
The rest of this article will walk you through the steps of recording video from two color cameras to a single file with multiple video tracks.
Re-stream video from an IP camera (RTSP/RTP re-streaming) in Wowza Streaming Engine Originally Published on Updated on 3:09 pm PST Publish a live stream from an IP camera to Wowza Streaming Engine™ media server software for playback on a wide variety of players. If you need Webcam/Screen Video Capture Free, please go to:can capture all your favorite videos that are playing on you. IP Camera Support vMix supports adding some IP Cameras via the 'Stream' input menu. Found under 'Add Input' - 'Stream'. The Stream input supports adding IP Cameras and Streaming Servers that support the RTSP or Transport Stream protocols. The LC200 captures various video sources, including HDMI inputs, Lumens IP cameras, and RTSP streams, and allows you to switch among them. Together with four line-in / MIC-in inputs, you can provide a complete audiovisual experience to your viewers! Furthermore, programmed video can directly show on a HDMI display without any device in between. Telecharger pdf apk android.
Find available sensor groups
A MediaFrameSourceGroup represents a collection of frame sources, typically cameras, that can be accessed simulataneously. The set of available frame source groups is different for each device, so the first step in this example is to get the list of available frame source groups and finding one that contains the necessary cameras for the scenario, which in this case requires two color cameras.
The MediaFrameSourceGroup.FindAllAsync method returns all source groups available on the current device. Each returned MediaFrameSourceGroup has a list of MediaFrameSourceInfo objects that describes each frame source in the group. A Linq query is used to find a source group that contains two color cameras, one on the front panel and one on the back. An anonymous object is returned that contains the selected MediaFrameSourceGroup and the MediaFrameSourceInfo for each color camera. Instead of using Linq syntax, you could instead loop through each group, and then each MediaFrameSourceInfo to look for a group that meets your requirements.
Note that not every device will contain a source group that contains two color cameras, so you should check to make sure that a source group was found before trying to capture video. Substance alchemist 2019 1 2 0.
Initialize the MediaCapture object
The MediaCapture class is the primary class that is used for most audio, video, and photo capture operations in UWP apps. Initialize the object by calling InitializeAsync, passing in a MediaCaptureInitializationSettings object that contains initialization parameters. In this example, the only specified setting is the SourceGroup property, which is set to the MediaFrameSourceGroup that was retrieved in the previous code example.
For information on other operations you can perform with MediaCapture and other UWP app features for capturing media, see Camera.
Create a MediaEncodingProfile
The MediaEncodingProfile class tells the media capture pipeline how captured audio and video should be encoded as they are written to a file. For typical capture and transcoding scenarios, this class provides a set of static methods for creating common profiles, like CreateAvi and CreateMp3. For this example, an encoding profile is manually created using an Mpeg4 container and H264 video encoding. Video encoding settings are specified using a VideoEncodingProperties object. For each color camera used in this scenario, a VideoStreamDescriptor object is configured. The descriptor is constructed with the VideoEncodingProperties object specifying the encoding. The Label property of the VideoStreamDescriptor must be set to the ID of the media frame source that will be captured to the stream. This is how the capture pipeline knows which stream descriptor and encoding properties should be used for each camera. The ID of the frame source is exposed by the MediaFrameSourceInfo objects that were found in the previous section, when a MediaFrameSourceGroup was selected.
Starting with Windows 10, version 1709, you can set multiple encoding properties on a MediaEncodingProfile by calling SetVideoTracks. You can retrieve the list of video stream descriptors by calling GetVideoTracks. Note that if you set the Video property, which stores a single stream descriptor, the descriptor list you set by calling SetVideoTracks will be replaced with a list containing the single descriptor you specified.
Encode timed metadata in media files
Starting with Windows 10, version 1803, in addition to audio and video you can encode timed metadata into a media file for which the data format is supported. For example, GoPro metadata (gpmd) can be stored in MP4 files to convey the geographic location correlated with a video stream.
Encoding metadata uses a pattern that is parallel to encoding audio or video. The TimedMetadataEncodingProperties class describes the type, subtype and encoding properties of the metadata, like VideoEncodingProperties does for video. The TimedMetadataStreamDescriptor identifies a metadata stream, just as the VideoStreamDescriptor does for video streams.
The following example shows how to intialize a TimedMetadataStreamDescriptor object. First, a TimedMetadataEncodingProperties object is created and the Subtype is set to a GUID that identifies the type of metadata that will be included in the stream. This example uses the GUID for GoPro metadata (gpmd). The SetFormatUserData method is called to set format-specific data. For MP4 files, the format-specific data is stored in the SampleDescription box (stsd). Next, a new TimedMetadataStreamDescriptor is created from the encoding properties. The Label and Name properties are set to identify the stream to be encoded.
Call MediaEncodingProfile.SetTimedMetadataTracks to add the metadata stream descriptor to the encoding profile. Rodion shchedrin basso ostinato sheet music impsl. The following example shows a helper method that takes two video stream descriptors, one audio stream descriptor, and one timed metadata stream descriptor and returns a MediaEncodingProfile that can be used to encode the streams.
Record using the multi-stream MediaEncodingProfile
The final step in this example is to initiate video capture by calling StartRecordToStorageFileAsync, passing in the StorageFile to which the captured media is written, and the MediaEncodingProfile created in the previous code example. After waiting a few seconds, the recording is stopped with a call to StopRecordAsync.
When the operation is complete, a video file will have been created that contains the video captured from each camera encoded as a separate stream within the file. For information on playing media files containing multiple video tracks, see Media items, playlists, and tracks.
Related topics
I'm working towards an advanced motion detection plugin for openHab.org using OpenCV Java, and need to be able to read a video stream directly from an IP camera, preferably an h.264 stream.
I have found out how to do the with a webcam, but an IP camera is a very different problem. I would prefer not to store video to a file and read from the file to keep delays at a bare minimum (unless that's the only solution).
How is this best accomplished in OpenCV Java?
https://coolfup536.weebly.com/latest-no-deposit-bonuses.html. Based on a suggestion by Haris below; I tried;
The results are; Exception in thread 'main' java.lang.UnsatisfiedLinkError:
org.opencv.highgui.VideoCapture.VideoCapture_0()J at
org.opencv.highgui.VideoCapture.VideoCapture_0(Native Method) at org.opencv.highgui.VideoCapture.(VideoCapture.java:101) at
org.openhab.action.videoanalytics.MotionDetect.main(MotionDetect.java:24)
Per Alexander Smorkalov's suggestion, I updated to 2.4.7.
Now when I execute;
it seems to behave, with no errors thrown. I'm using Eclipse as my dev/debug environment, so I'm stepping through (and into many) lines of code with it's debugger.
The following line results in 'true' (and prints out the text), which implies that the VideoCapture connection has been opened;
But there is nothing there when I go to grab frames from the mjpeg feed;
Inside the C++ VideoCapture class is a 'grab()' operation that is returning 'false';
boolean retVal = grab_0(nativeObj);
Asap rocky peso acapella. And then this error message appears;
I went to Ubuntu Software Center, did a search on GStreamer and came up with this list of plugins, which are all installed on my system;
GStreamer FFMPEG video plugin,GStreamer extra pluginsGStreamer plugins for mms, wavpak, quicktime, musepackGStreamer plugins for aas, xvid, mpeg2, faad
Free Video Camera Capture Software
So I went to Synaptic to see what GStreamer plugins where loaded or available. Bluestacks 3 2018. I must say I was rather stunned by the long list, and have not been able to determine which plugin I'm missing. I'm including a screenshot of the list (and there are a few more past the end of the screenshot);
Am I simply declaring it improperly, or is there a better way? @berak has said that this is not yet fully implemented in the baselined code, so do I need to report this as a bug?
Please bear with me, I'm new here and returning to Java programming after 12 years away from hands-on coding.
Capture Video From A Camcorder
Comments
@Will, not your fault, it's a bug. there's no native open method(or constructor), that takes a string(file/url).
Capture Video Stream Windows 10
it was fixed in master, but unfortunately not in 2.4